V2 HAS BEEN RELEASED ipv6 and ntp and fast dhcp option is supported, hostnames are supported, Fixes for Nest thermostats Benchmarks added, significant performance uplifts in how many requests per second.

A simple and zero-dependency DHCP server written in Rust, with credit to Richard Warburton for contributions to parts of the code.

Features

Lightweight and minimalistic DHCP server.
Zero external dependencies; just Rust!
Easy to use and configure.
Based on reliable networking libraries.
Fast and efficient.
Cross-platform support and cross-compilation.
Customizable Leases File: Support for a "leases" file that allows you to define permanent leases, ensuring clients always receive the same IP address.
Managed DHCPv6 range: stateful DHCPv6 (RFC 8415) address allocation from a configured IPv6 pool, with DUID-based leases.
Single dhcp.conf file: every IPv4 and IPv6 setting in one place, no recompiling to reconfigure.

Installation
Usage
Configuration
Contributions
License

Installation

Make sure you have Rust installed. If not, install it from https://www.rust-lang.org/.

Clone this repository:

git clone https://github.com/pj1234678/RustyDHCP.git

Build the server:
```
cd RustyDHCP
cargo build --release
```

Usage

Start the DHCP server (no arguments; it always reads ./dhcp.conf):
```
sudo ./target/release/dhcp4r
```
The server will listen on the configured DHCP ports (67 for IPv4, 547 for IPv6 when enabled) and start serving DHCP requests. Every DHCP Request is also printed monitor-style (timestamp\tmac\tip\thostname\tOnline).
Make DHCP requests from clients, and the server will respond with IP addresses and other configuration details.

Diagnosing clients

Every handshake step is logged: DISCOVER -> OFFER/ACK, REQUEST -> ACK/NAK (reason), RELEASE -> freed, pool-exhaustion (no reply ... used), ignored packets (unsupported message type, no client ID, server_id mismatch), and malformed datagrams (ignoring malformed ...: reason). If a client (e.g. an IoT thermostat) won't connect while dnsmasq works, watch for:

INFORM ... ignored — this server does not answer DHCPINFORM; dnsmasq does.
-> NAK ... outside pool range — the client asks for an address outside ip_start + lease_num.
no reply (pool exhausted ...) — all leases are handed out.
ignoring malformed ... — the client's packet fails to decode at all.
-> OFFER ... to [192.168.2.255:68, 255.255.255.255:68] but the client never sends Request — check for a unicast copy in the list. With the broadcast flag clear the server unicasts a copy to the offered address (..., 192.168.2.x:68, RFC 2131 §4.1, like dnsmasq) alongside the broadcasts, for clients/APs that drop every broadcast flavor. If even the unicast copy never arrives, suspect AP broadcast handling or firewall, and compare a dnsmasq capture (tcpdump -i <lan> -e -vvv).

Configuration

All settings live in a single dhcp.conf file using a minimal key = value format (no dependencies to parse it). Blank lines and lines starting with # or ; are ignored, keys are case-insensitive, a trailing # comment is stripped, duplicate keys use the last value, and unknown keys are ignored. Any malformed line or invalid value fails loudly with the key and line number. If the file is missing, the server warns and uses the built-in defaults below.

Key	Default	Description
`server_ip`	`192.168.2.1`	This server's address (DHCP option 54)
`ip_start`	`192.168.2.2`	First address of the managed IPv4 pool
`lease_num`	`252`	IPv4 pool size (covers `.2` .. `.253`)
`subnet_mask`	`255.255.255.0`	Advertised subnet mask (option 1)
`router_ip`	`192.168.2.1`	Advertised gateway (option 3)
`dns_ips`	`8.8.8.8`	Advertised DNS servers, comma-separated (option 6)
`enable_ntp`	`false`	Master switch for advertising NTP servers (option 42)
`ntp_ips`	(empty)	Advertised NTP servers, comma-separated (option 42); sent only when `enable_ntp` is true and the list is non-empty
`enable_rapid_commit`	`false`	Master switch for DHCP Rapid Commit (option 80 for IPv4, option 14 for IPv6)
`broadcast_ip`	`192.168.2.255`	Where broadcast replies are sent; comma-separated list fans each reply out to every address (e.g. `192.168.2.255, 255.255.255.255`)
`extra_broadcast_ips`	(empty)	Additional broadcast destinations, comma-separated; appended to `broadcast_ip`
`lease_duration_secs`	`86400`	IPv4 lease lifetime (option 51)
`leases_file`	`leases`	Permanent `mac,ip` reservations
`listen_addr`	`0.0.0.0:67`	Address to bind for DHCPv4
`enable_dhcpv6`	`false`	Master switch for the DHCPv6 service
`server_duid`	`00:03:00:01:02:00:5e:aa:bb:cc`	Server DUID for SERVERID (1..=128 hex bytes)
`ipv6_start`	`fd00::100`	First address of the managed IPv6 pool
`ipv6_lease_num`	`1000`	IPv6 pool size
`ipv6_dns`	`2001:4860:4860::8888`	Advertised DNS servers, comma-separated (option 23)
`ipv6_lease_duration_secs`	`86400`	IPv6 preferred + valid lifetimes (IAADDR)
`leases_file_v6`	`leases6`	Permanent `duid-hex,ipv6` reservations
`listen_addr_v6`	`[::]:547`	Address to bind for DHCPv6

See the shipped dhcp.conf for a fully commented example. Boolean values accept true/false, yes/no, on/off, 1/0 (any case).

DHCPv6 managed range (RFC 8415)

Set enable_dhcpv6 = true and configure ipv6_start / ipv6_lease_num to serve stateful DHCPv6 on port 547 alongside DHCPv4:

Solicit → Advertise: offers the client's current address, else the first free address of the managed range (round-robin).
Request / Renew / Rebind → Reply: commits the requested IA_NA address; T1/T2 are set to half / seven-eighths of the lease lifetime.
Release / Decline → frees the client's lease (only when the Server ID matches this server).
Pool exhaustion (or any failure) gets a Reply with Status Code NoAddrsAvail (2).

Clients are identified by their exact DUID bytes and leases work like the IPv4 side, with one deliberate difference: infinite (file-reserved) IPv6 leases are never stealable. Malformed lines in leases6 are skipped without killing the server.

To create a "leases" file with the example permanent lease, you can manually create a file named "leases" in the same directory as the compiled program with the following content:

f4:5c:19:af:96:8d,192.168.2.90

This lease format specifies the MAC address and the corresponding IP address for the client. The DHCP server will read this file to assign permanent leases based on its contents.

Client host names (DHCP option 12)

When a client announces a host name (option 12, RFC 2132 §3.14), the server records it against the lease: it is stored when the lease is created, refreshed whenever a later Discover or Request carries a name, and left untouched by packets that omit it (so renewals without the option don't flap the recorded name). Releasing the lease drops the name with it. Malformed (non-UTF-8) names never reach the server logic — the decoder already rejects them. The monitor prints the recorded name per Request (- when the client sent none):

2026-01-01T12:00:00	f4:5c:19:af:96:8d	192.168.2.90	laptop	Online

The IPv6 equivalent is a "leases6" file with duid-hex,ipv6 lines, for example:

00:03:00:01:02:00:5e:aa:bb:cc,fd00::100

DHCP Rapid Commit

Set enable_rapid_commit = true to allow the 2-message exchange: a Discover (IPv4, RFC 4039 option 80) or Solicit (IPv6, RFC 8415 option 14) carrying the rapid-commit option is answered immediately with an Ack/Reply that commits the lease, skipping Offer/Advertise. Without both the flag and the option on the wire, the server uses the legacy 4-message flow. Rapid-commit selection is Discover-style (current lease, else round-robin); pool exhaustion behaves like the unanswered Discover/Advertise path.

Contributions

This DHCP server has been made possible with contributions from the open-source community, including valuable code from Richard Warburton. Feel free to contribute to this project and make it even better!

If you find a bug or have a feature request, please open an issue on the GitHub repository.

License

This project is licensed under the MIT License - see the LICENSE file for details.

Note: Remember to use this DHCP server responsibly and comply with local network regulations and security practices.

README.md

RustyDHCP V2