Initial commit

2024-01-08 01:27:02 +08:00
40 changed files with 0 additions and 931 deletions
@@ -1,63 +0,0 @@
 ###############################################################################
 # Set default behavior to automatically normalize line endings.
 ###############################################################################
 * text=auto
 ###############################################################################
 # Set default behavior for command prompt diff.
 #
 # This is need for earlier builds of msysgit that does not have it on by
 # default for csharp files.
 # Note: This is only used by command line
 ###############################################################################
 #*.cs     diff=csharp
 ###############################################################################
 # Set the merge driver for project and solution files
 #
 # Merging from the command prompt will add diff markers to the files if there
 # are conflicts (Merging from VS is not affected by the settings below, in VS
 # the diff markers are never inserted). Diff markers may cause the following 
 # file extensions to fail to load in VS. An alternative would be to treat
 # these files as binary and thus will always conflict and require user
 # intervention with every merge. To do so, just uncomment the entries below
 ###############################################################################
 #*.sln       merge=binary
 #*.csproj    merge=binary
 #*.vbproj    merge=binary
 #*.vcxproj   merge=binary
 #*.vcproj    merge=binary
 #*.dbproj    merge=binary
 #*.fsproj    merge=binary
 #*.lsproj    merge=binary
 #*.wixproj   merge=binary
 #*.modelproj merge=binary
 #*.sqlproj   merge=binary
 #*.wwaproj   merge=binary
 ###############################################################################
 # behavior for image files
 #
 # image files are treated as binary by default.
 ###############################################################################
 #*.jpg   binary
 #*.png   binary
 #*.gif   binary
 ###############################################################################
 # diff behavior for common document formats
 # 
 # Convert binary document formats to text before diffing them. This feature
 # is only available from the command line. Turn it on by uncommenting the 
 # entries below.
 ###############################################################################
 #*.doc   diff=astextplain
 #*.DOC   diff=astextplain
 #*.docx  diff=astextplain
 #*.DOCX  diff=astextplain
 #*.dot   diff=astextplain
 #*.DOT   diff=astextplain
 #*.pdf   diff=astextplain
 #*.PDF   diff=astextplain
 #*.rtf   diff=astextplain
 #*.RTF   diff=astextplain
@@ -1,363 +0,0 @@
 ## Ignore Visual Studio temporary files, build results, and
 ## files generated by popular Visual Studio add-ons.
 ##
 ## Get latest from https://github.com/github/gitignore/blob/master/VisualStudio.gitignore
 # User-specific files
 *.rsuser
 *.suo
 *.user
 *.userosscache
 *.sln.docstates
 # User-specific files (MonoDevelop/Xamarin Studio)
 *.userprefs
 # Mono auto generated files
 mono_crash.*
 # Build results
 [Dd]ebug/
 [Dd]ebugPublic/
 [Rr]elease/
 [Rr]eleases/
 x64/
 x86/
 [Ww][Ii][Nn]32/
 [Aa][Rr][Mm]/
 [Aa][Rr][Mm]64/
 bld/
 [Bb]in/
 [Oo]bj/
 [Oo]ut/
 [Ll]og/
 [Ll]ogs/
 # Visual Studio 2015/2017 cache/options directory
 .vs/
 # Uncomment if you have tasks that create the project's static files in wwwroot
 #wwwroot/
 # Visual Studio 2017 auto generated files
 Generated\ Files/
 # MSTest test Results
 [Tt]est[Rr]esult*/
 [Bb]uild[Ll]og.*
 # NUnit
 *.VisualState.xml
 TestResult.xml
 nunit-*.xml
 # Build Results of an ATL Project
 [Dd]ebugPS/
 [Rr]eleasePS/
 dlldata.c
 # Benchmark Results
 BenchmarkDotNet.Artifacts/
 # .NET Core
 project.lock.json
 project.fragment.lock.json
 artifacts/
 # ASP.NET Scaffolding
 ScaffoldingReadMe.txt
 # StyleCop
 StyleCopReport.xml
 # Files built by Visual Studio
 *_i.c
 *_p.c
 *_h.h
 *.ilk
 *.meta
 *.obj
 *.iobj
 *.pch
 *.pdb
 *.ipdb
 *.pgc
 *.pgd
 *.rsp
 *.sbr
 *.tlb
 *.tli
 *.tlh
 *.tmp
 *.tmp_proj
 *_wpftmp.csproj
 *.log
 *.vspscc
 *.vssscc
 .builds
 *.pidb
 *.svclog
 *.scc
 # Chutzpah Test files
 _Chutzpah*
 # Visual C++ cache files
 ipch/
 *.aps
 *.ncb
 *.opendb
 *.opensdf
 *.sdf
 *.cachefile
 *.VC.db
 *.VC.VC.opendb
 # Visual Studio profiler
 *.psess
 *.vsp
 *.vspx
 *.sap
 # Visual Studio Trace Files
 *.e2e
 # TFS 2012 Local Workspace
 $tf/
 # Guidance Automation Toolkit
 *.gpState
 # ReSharper is a .NET coding add-in
 _ReSharper*/
 *.[Rr]e[Ss]harper
 *.DotSettings.user
 # TeamCity is a build add-in
 _TeamCity*
 # DotCover is a Code Coverage Tool
 *.dotCover
 # AxoCover is a Code Coverage Tool
 .axoCover/*
 !.axoCover/settings.json
 # Coverlet is a free, cross platform Code Coverage Tool
 coverage*.json
 coverage*.xml
 coverage*.info
 # Visual Studio code coverage results
 *.coverage
 *.coveragexml
 # NCrunch
 _NCrunch_*
 .*crunch*.local.xml
 nCrunchTemp_*
 # MightyMoose
 *.mm.*
 AutoTest.Net/
 # Web workbench (sass)
 .sass-cache/
 # Installshield output folder
 [Ee]xpress/
 # DocProject is a documentation generator add-in
 DocProject/buildhelp/
 DocProject/Help/*.HxT
 DocProject/Help/*.HxC
 DocProject/Help/*.hhc
 DocProject/Help/*.hhk
 DocProject/Help/*.hhp
 DocProject/Help/Html2
 DocProject/Help/html
 # Click-Once directory
 publish/
 # Publish Web Output
 *.[Pp]ublish.xml
 *.azurePubxml
 # Note: Comment the next line if you want to checkin your web deploy settings,
 # but database connection strings (with potential passwords) will be unencrypted
 *.pubxml
 *.publishproj
 # Microsoft Azure Web App publish settings. Comment the next line if you want to
 # checkin your Azure Web App publish settings, but sensitive information contained
 # in these scripts will be unencrypted
 PublishScripts/
 # NuGet Packages
 *.nupkg
 # NuGet Symbol Packages
 *.snupkg
 # The packages folder can be ignored because of Package Restore
 **/[Pp]ackages/*
 # except build/, which is used as an MSBuild target.
 !**/[Pp]ackages/build/
 # Uncomment if necessary however generally it will be regenerated when needed
 #!**/[Pp]ackages/repositories.config
 # NuGet v3's project.json files produces more ignorable files
 *.nuget.props
 *.nuget.targets
 # Microsoft Azure Build Output
 csx/
 *.build.csdef
 # Microsoft Azure Emulator
 ecf/
 rcf/
 # Windows Store app package directories and files
 AppPackages/
 BundleArtifacts/
 Package.StoreAssociation.xml
 _pkginfo.txt
 *.appx
 *.appxbundle
 *.appxupload
 # Visual Studio cache files
 # files ending in .cache can be ignored
 *.[Cc]ache
 # but keep track of directories ending in .cache
 !?*.[Cc]ache/
 # Others
 ClientBin/
 ~$*
 *~
 *.dbmdl
 *.dbproj.schemaview
 *.jfm
 *.pfx
 *.publishsettings
 orleans.codegen.cs
 # Including strong name files can present a security risk
 # (https://github.com/github/gitignore/pull/2483#issue-259490424)
 #*.snk
 # Since there are multiple workflows, uncomment next line to ignore bower_components
 # (https://github.com/github/gitignore/pull/1529#issuecomment-104372622)
 #bower_components/
 # RIA/Silverlight projects
 Generated_Code/
 # Backup & report files from converting an old project file
 # to a newer Visual Studio version. Backup files are not needed,
 # because we have git ;-)
 _UpgradeReport_Files/
 Backup*/
 UpgradeLog*.XML
 UpgradeLog*.htm
 ServiceFabricBackup/
 *.rptproj.bak
 # SQL Server files
 *.mdf
 *.ldf
 *.ndf
 # Business Intelligence projects
 *.rdl.data
 *.bim.layout
 *.bim_*.settings
 *.rptproj.rsuser
 *- [Bb]ackup.rdl
 *- [Bb]ackup ([0-9]).rdl
 *- [Bb]ackup ([0-9][0-9]).rdl
 # Microsoft Fakes
 FakesAssemblies/
 # GhostDoc plugin setting file
 *.GhostDoc.xml
 # Node.js Tools for Visual Studio
 .ntvs_analysis.dat
 node_modules/
 # Visual Studio 6 build log
 *.plg
 # Visual Studio 6 workspace options file
 *.opt
 # Visual Studio 6 auto-generated workspace file (contains which files were open etc.)
 *.vbw
 # Visual Studio LightSwitch build output
 **/*.HTMLClient/GeneratedArtifacts
 **/*.DesktopClient/GeneratedArtifacts
 **/*.DesktopClient/ModelManifest.xml
 **/*.Server/GeneratedArtifacts
 **/*.Server/ModelManifest.xml
 _Pvt_Extensions
 # Paket dependency manager
 .paket/paket.exe
 paket-files/
 # FAKE - F# Make
 .fake/
 # CodeRush personal settings
 .cr/personal
 # Python Tools for Visual Studio (PTVS)
 __pycache__/
 *.pyc
 # Cake - Uncomment if you are using it
 # tools/**
 # !tools/packages.config
 # Tabs Studio
 *.tss
 # Telerik's JustMock configuration file
 *.jmconfig
 # BizTalk build output
 *.btp.cs
 *.btm.cs
 *.odx.cs
 *.xsd.cs
 # OpenCover UI analysis results
 OpenCover/
 # Azure Stream Analytics local run output
 ASALocalRun/
 # MSBuild Binary and Structured Log
 *.binlog
 # NVidia Nsight GPU debugger configuration file
 *.nvuser
 # MFractors (Xamarin productivity tool) working folder
 .mfractor/
 # Local History for Visual Studio
 .localhistory/
 # BeatPulse healthcheck temp database
 healthchecksdb
 # Backup folder for Package Reference Convert tool in Visual Studio 2017
 MigrationBackup/
 # Ionide (cross platform F# VS Code tools) working folder
 .ionide/
 # Fody - auto-generated XML schema
 FodyWeavers.xsd
@@ -1,201 +0,0 @@
                                 Apache License
                           Version 2.0, January 2004
                        http://www.apache.org/licenses/
   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
   1. Definitions.
      "License" shall mean the terms and conditions for use, reproduction,
      and distribution as defined by Sections 1 through 9 of this document.
      "Licensor" shall mean the copyright owner or entity authorized by
      the copyright owner that is granting the License.
      "Legal Entity" shall mean the union of the acting entity and all
      other entities that control, are controlled by, or are under common
      control with that entity. For the purposes of this definition,
      "control" means (i) the power, direct or indirect, to cause the
      direction or management of such entity, whether by contract or
      otherwise, or (ii) ownership of fifty percent (50%) or more of the
      outstanding shares, or (iii) beneficial ownership of such entity.
      "You" (or "Your") shall mean an individual or Legal Entity
      exercising permissions granted by this License.
      "Source" form shall mean the preferred form for making modifications,
      including but not limited to software source code, documentation
      source, and configuration files.
      "Object" form shall mean any form resulting from mechanical
      transformation or translation of a Source form, including but
      not limited to compiled object code, generated documentation,
      and conversions to other media types.
      "Work" shall mean the work of authorship, whether in Source or
      Object form, made available under the License, as indicated by a
      copyright notice that is included in or attached to the work
      (an example is provided in the Appendix below).
      "Derivative Works" shall mean any work, whether in Source or Object
      form, that is based on (or derived from) the Work and for which the
      editorial revisions, annotations, elaborations, or other modifications
      represent, as a whole, an original work of authorship. For the purposes
      of this License, Derivative Works shall not include works that remain
      separable from, or merely link (or bind by name) to the interfaces of,
      the Work and Derivative Works thereof.
      "Contribution" shall mean any work of authorship, including
      the original version of the Work and any modifications or additions
      to that Work or Derivative Works thereof, that is intentionally
      submitted to Licensor for inclusion in the Work by the copyright owner
      or by an individual or Legal Entity authorized to submit on behalf of
      the copyright owner. For the purposes of this definition, "submitted"
      means any form of electronic, verbal, or written communication sent
      to the Licensor or its representatives, including but not limited to
      communication on electronic mailing lists, source code control systems,
      and issue tracking systems that are managed by, or on behalf of, the
      Licensor for the purpose of discussing and improving the Work, but
      excluding communication that is conspicuously marked or otherwise
      designated in writing by the copyright owner as "Not a Contribution."
      "Contributor" shall mean Licensor and any individual or Legal Entity
      on behalf of whom a Contribution has been received by Licensor and
      subsequently incorporated within the Work.
   2. Grant of Copyright License. Subject to the terms and conditions of
      this License, each Contributor hereby grants to You a perpetual,
      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
      copyright license to reproduce, prepare Derivative Works of,
      publicly display, publicly perform, sublicense, and distribute the
      Work and such Derivative Works in Source or Object form.
   3. Grant of Patent License. Subject to the terms and conditions of
      this License, each Contributor hereby grants to You a perpetual,
      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
      (except as stated in this section) patent license to make, have made,
      use, offer to sell, sell, import, and otherwise transfer the Work,
      where such license applies only to those patent claims licensable
      by such Contributor that are necessarily infringed by their
      Contribution(s) alone or by combination of their Contribution(s)
      with the Work to which such Contribution(s) was submitted. If You
      institute patent litigation against any entity (including a
      cross-claim or counterclaim in a lawsuit) alleging that the Work
      or a Contribution incorporated within the Work constitutes direct
      or contributory patent infringement, then any patent licenses
      granted to You under this License for that Work shall terminate
      as of the date such litigation is filed.
   4. Redistribution. You may reproduce and distribute copies of the
      Work or Derivative Works thereof in any medium, with or without
      modifications, and in Source or Object form, provided that You
      meet the following conditions:
      (a) You must give any other recipients of the Work or
          Derivative Works a copy of this License; and
      (b) You must cause any modified files to carry prominent notices
          stating that You changed the files; and
      (c) You must retain, in the Source form of any Derivative Works
          that You distribute, all copyright, patent, trademark, and
          attribution notices from the Source form of the Work,
          excluding those notices that do not pertain to any part of
          the Derivative Works; and
      (d) If the Work includes a "NOTICE" text file as part of its
          distribution, then any Derivative Works that You distribute must
          include a readable copy of the attribution notices contained
          within such NOTICE file, excluding those notices that do not
          pertain to any part of the Derivative Works, in at least one
          of the following places: within a NOTICE text file distributed
          as part of the Derivative Works; within the Source form or
          documentation, if provided along with the Derivative Works; or,
          within a display generated by the Derivative Works, if and
          wherever such third-party notices normally appear. The contents
          of the NOTICE file are for informational purposes only and
          do not modify the License. You may add Your own attribution
          notices within Derivative Works that You distribute, alongside
          or as an addendum to the NOTICE text from the Work, provided
          that such additional attribution notices cannot be construed
          as modifying the License.
      You may add Your own copyright statement to Your modifications and
      may provide additional or different license terms and conditions
      for use, reproduction, or distribution of Your modifications, or
      for any such Derivative Works as a whole, provided Your use,
      reproduction, and distribution of the Work otherwise complies with
      the conditions stated in this License.
   5. Submission of Contributions. Unless You explicitly state otherwise,
      any Contribution intentionally submitted for inclusion in the Work
      by You to the Licensor shall be under the terms and conditions of
      this License, without any additional terms or conditions.
      Notwithstanding the above, nothing herein shall supersede or modify
      the terms of any separate license agreement you may have executed
      with Licensor regarding such Contributions.
   6. Trademarks. This License does not grant permission to use the trade
      names, trademarks, service marks, or product names of the Licensor,
      except as required for reasonable and customary use in describing the
      origin of the Work and reproducing the content of the NOTICE file.
   7. Disclaimer of Warranty. Unless required by applicable law or
      agreed to in writing, Licensor provides the Work (and each
      Contributor provides its Contributions) on an "AS IS" BASIS,
      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
      implied, including, without limitation, any warranties or conditions
      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
      PARTICULAR PURPOSE. You are solely responsible for determining the
      appropriateness of using or redistributing the Work and assume any
      risks associated with Your exercise of permissions under this License.
   8. Limitation of Liability. In no event and under no legal theory,
      whether in tort (including negligence), contract, or otherwise,
      unless required by applicable law (such as deliberate and grossly
      negligent acts) or agreed to in writing, shall any Contributor be
      liable to You for damages, including any direct, indirect, special,
      incidental, or consequential damages of any character arising as a
      result of this License or out of the use or inability to use the
      Work (including but not limited to damages for loss of goodwill,
      work stoppage, computer failure or malfunction, or any and all
      other commercial damages or losses), even if such Contributor
      has been advised of the possibility of such damages.
   9. Accepting Warranty or Additional Liability. While redistributing
      the Work or Derivative Works thereof, You may choose to offer,
      and charge a fee for, acceptance of support, warranty, indemnity,
      or other liability obligations and/or rights consistent with this
      License. However, in accepting such obligations, You may act only
      on Your own behalf and on Your sole responsibility, not on behalf
      of any other Contributor, and only if You agree to indemnify,
      defend, and hold each Contributor harmless for any liability
      incurred by, or claims asserted against, such Contributor by reason
      of your accepting any such warranty or additional liability.
   END OF TERMS AND CONDITIONS
   APPENDIX: How to apply the Apache License to your work.
      To apply the Apache License to your work, attach the following
      boilerplate notice, with the fields enclosed by brackets "[]"
      replaced with your own identifying information. (Don't include
      the brackets!)  The text should be enclosed in the appropriate
      comment syntax for the file format. We also recommend that a
      file or class name and description of purpose be included on the
      same "printed page" as the copyright notice for easier
      identification within third-party archives.
   Copyright [yyyy] [name of copyright owner]
   Licensed under the Apache License, Version 2.0 (the "License");
   you may not use this file except in compliance with the License.
   You may obtain a copy of the License at
       http://www.apache.org/licenses/LICENSE-2.0
   Unless required by applicable law or agreed to in writing, software
   distributed under the License is distributed on an "AS IS" BASIS,
   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   See the License for the specific language governing permissions and
   limitations under the License.
@@ -1,9 +0,0 @@
 <Application x:Class="WxappCpzs.A.App"
             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
             xmlns:local="clr-namespace:WxappCpzs.A"
             StartupUri="MainWindow.xaml">
    <Application.Resources>
    </Application.Resources>
 </Application>
@@ -1,14 +0,0 @@
 using System.Configuration;
 using System.Data;
 using System.Windows;
 namespace WxappCpzs.A
 {
    /// <summary>
    /// Interaction logic for App.xaml
    /// </summary>
    public partial class App : Application
    {
    }
 }
@@ -1,10 +0,0 @@
 using System.Windows;
 [assembly: ThemeInfo(
    ResourceDictionaryLocation.None,            //where theme specific resource dictionaries are located
                                                //(used if a resource is not found in the page,
                                                // or application resource dictionaries)
    ResourceDictionaryLocation.SourceAssembly   //where the generic resource dictionary is located
                                                //(used if a resource is not found in the page,
                                                // app, or any theme specific resource dictionaries)
 )]
@@ -1,12 +0,0 @@
 <Window x:Class="WxappCpzs.A.MainWindow"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
        xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
        xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
        xmlns:local="clr-namespace:WxappCpzs.A"
        mc:Ignorable="d"
        Title="MainWindow" Height="450" Width="800">
    <Grid>
    </Grid>
 </Window>
@@ -1,24 +0,0 @@
 using System.Text;
 using System.Windows;
 using System.Windows.Controls;
 using System.Windows.Data;
 using System.Windows.Documents;
 using System.Windows.Input;
 using System.Windows.Media;
 using System.Windows.Media.Imaging;
 using System.Windows.Navigation;
 using System.Windows.Shapes;
 namespace WxappCpzs.A
 {
    /// <summary>
    /// Interaction logic for MainWindow.xaml
    /// </summary>
    public partial class MainWindow : Window
    {
        public MainWindow()
        {
            InitializeComponent();
        }
    }
 }
@@ -1,11 +0,0 @@
 <Project Sdk="Microsoft.NET.Sdk">
  <PropertyGroup>
    <OutputType>WinExe</OutputType>
    <TargetFramework>net8.0-windows</TargetFramework>
    <Nullable>enable</Nullable>
    <ImplicitUsings>enable</ImplicitUsings>
    <UseWPF>true</UseWPF>
  </PropertyGroup>
 </Project>
@@ -1,6 +0,0 @@
 <?xml version="1.0" encoding="utf-8"?>
 <manifest xmlns:android="http://schemas.android.com/apk/res/android">
  <application android:allowBackup="true" android:icon="@mipmap/appicon" android:label="@string/app_name" android:roundIcon="@mipmap/appicon_round" android:supportsRtl="true">
  </application>
  <uses-permission android:name="android.permission.INTERNET" />
 </manifest>
@@ -1,14 +0,0 @@
 namespace WxappCpzs.Android
 {
    [Activity(Label = "@string/app_name", MainLauncher = true)]
    public class MainActivity : Activity
    {
        protected override void OnCreate(Bundle? savedInstanceState)
        {
            base.OnCreate(savedInstanceState);
            // Set our view from the "main" layout resource
            SetContentView(Resource.Layout.activity_main);
        }
    }
 }
@@ -1,44 +0,0 @@
 Images, layout descriptions, binary blobs and string dictionaries can be included 
 in your application as resource files.  Various Android APIs are designed to 
 operate on the resource IDs instead of dealing with images, strings or binary blobs 
 directly.
 For example, a sample Android app that contains a user interface layout (main.xml),
 an internationalization string table (strings.xml) and some icons (drawable-XXX/icon.png) 
 would keep its resources in the "Resources" directory of the application:
 Resources/
    drawable/
        icon.png
    layout/
        main.xml
    values/
        strings.xml
 In order to get the build system to recognize Android resources, set the build action to
 "AndroidResource".  The native Android APIs do not operate directly with filenames, but 
 instead operate on resource IDs.  When you compile an Android application that uses resources, 
 the build system will package the resources for distribution and generate a class called "Resource" 
 (this is an Android convention) that contains the tokens for each one of the resources 
 included. For example, for the above Resources layout, this is what the Resource class would expose:
 public class Resource {
    public class Drawable {
        public const int icon = 0x123;
    }
    public class Layout {
        public const int main = 0x456;
    }
    public class Strings {
        public const int first_string = 0xabc;
        public const int second_string = 0xbcd;
    }
 }
 You would then use Resource.Drawable.icon to reference the drawable/icon.png file, or 
 Resource.Layout.main to reference the layout/main.xml file, or Resource.Strings.first_string 
 to reference the first string in the dictionary file values/strings.xml.
@@ -1,13 +0,0 @@
 <?xml version="1.0" encoding="utf-8"?>
 <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
    xmlns:app="http://schemas.android.com/apk/res-auto"
    xmlns:tools="http://schemas.android.com/tools"
    android:layout_width="match_parent"
    android:layout_height="match_parent">
    <TextView 
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:layout_centerInParent="true"
        android:text="@string/app_text"
    />
 </RelativeLayout>
@@ -1,4 +0,0 @@
 <adaptive-icon xmlns:android="http://schemas.android.com/apk/res/android">
  <background android:drawable="@mipmap/appicon_background" />
  <foreground android:drawable="@mipmap/appicon_foreground" />
 </adaptive-icon>
@@ -1,4 +0,0 @@
 <adaptive-icon xmlns:android="http://schemas.android.com/apk/res/android">
  <background android:drawable="@mipmap/appicon_background" />
  <foreground android:drawable="@mipmap/appicon_foreground" />
 </adaptive-icon>
@@ -1,4 +0,0 @@
 <?xml version="1.0" encoding="utf-8"?>
 <resources>
    <color name="ic_launcher_background">#2C3E50</color>
 </resources>
@@ -1,4 +0,0 @@
 <resources>
    <string name="app_name">WxappCpzs.Android</string>
    <string name="app_text">Hello, Android!</string>
 </resources>
@@ -1,12 +0,0 @@
 <Project Sdk="Microsoft.NET.Sdk">
  <PropertyGroup>
    <TargetFramework>net8.0-android</TargetFramework>
    <SupportedOSPlatformVersion>21</SupportedOSPlatformVersion>
    <OutputType>Exe</OutputType>
    <Nullable>enable</Nullable>
    <ImplicitUsings>enable</ImplicitUsings>
    <ApplicationId>com.wxapp.cpzs.AndroidApp</ApplicationId>
    <ApplicationVersion>1</ApplicationVersion>
    <ApplicationDisplayVersion>1.0</ApplicationDisplayVersion>
  </PropertyGroup>
 </Project>
@@ -1,39 +0,0 @@
 Microsoft Visual Studio Solution File, Format Version 12.00
 # Visual Studio Version 17
 VisualStudioVersion = 17.8.34219.65
 MinimumVisualStudioVersion = 10.0.40219.1
 Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "WxappCpzs", "WxappCpzs\WxappCpzs.csproj", "{3270957E-F0F0-4C07-B89B-5D43E57F635D}"
 EndProject
 Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "WxappCpzs.D", "WxappCpzs.A\WxappCpzs.D.csproj", "{DE405B3C-FCF6-4484-A633-02E1BE946A7F}"
 EndProject
 Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "WxappCpzs.Android", "WxappCpzs.Android\WxappCpzs.Android.csproj", "{832C8398-BF5C-4045-B4EA-9F5FF48C6A63}"
 EndProject
 Global
 	GlobalSection(SolutionConfigurationPlatforms) = preSolution
 		Debug|Any CPU = Debug|Any CPU
 		Release|Any CPU = Release|Any CPU
 	EndGlobalSection
 	GlobalSection(ProjectConfigurationPlatforms) = postSolution
 		{3270957E-F0F0-4C07-B89B-5D43E57F635D}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
 		{3270957E-F0F0-4C07-B89B-5D43E57F635D}.Debug|Any CPU.Build.0 = Debug|Any CPU
 		{3270957E-F0F0-4C07-B89B-5D43E57F635D}.Release|Any CPU.ActiveCfg = Release|Any CPU
 		{3270957E-F0F0-4C07-B89B-5D43E57F635D}.Release|Any CPU.Build.0 = Release|Any CPU
 		{DE405B3C-FCF6-4484-A633-02E1BE946A7F}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
 		{DE405B3C-FCF6-4484-A633-02E1BE946A7F}.Debug|Any CPU.Build.0 = Debug|Any CPU
 		{DE405B3C-FCF6-4484-A633-02E1BE946A7F}.Release|Any CPU.ActiveCfg = Release|Any CPU
 		{DE405B3C-FCF6-4484-A633-02E1BE946A7F}.Release|Any CPU.Build.0 = Release|Any CPU
 		{832C8398-BF5C-4045-B4EA-9F5FF48C6A63}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
 		{832C8398-BF5C-4045-B4EA-9F5FF48C6A63}.Debug|Any CPU.Build.0 = Debug|Any CPU
 		{832C8398-BF5C-4045-B4EA-9F5FF48C6A63}.Debug|Any CPU.Deploy.0 = Debug|Any CPU
 		{832C8398-BF5C-4045-B4EA-9F5FF48C6A63}.Release|Any CPU.ActiveCfg = Release|Any CPU
 		{832C8398-BF5C-4045-B4EA-9F5FF48C6A63}.Release|Any CPU.Build.0 = Release|Any CPU
 		{832C8398-BF5C-4045-B4EA-9F5FF48C6A63}.Release|Any CPU.Deploy.0 = Release|Any CPU
 	EndGlobalSection
 	GlobalSection(SolutionProperties) = preSolution
 		HideSolutionNode = FALSE
 	EndGlobalSection
 	GlobalSection(ExtensibilityGlobals) = postSolution
 		SolutionGuid = {B2E5FF2A-15B1-4A2D-A5EB-15855A64D965}
 	EndGlobalSection
 EndGlobal
@@ -1,9 +0,0 @@
 <Application x:Class="WxappCpzs.App"
             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
             xmlns:local="clr-namespace:WxappCpzs"
             StartupUri="MainWindow.xaml">
    <Application.Resources>
    </Application.Resources>
 </Application>
@@ -1,14 +0,0 @@
 using System.Configuration;
 using System.Data;
 using System.Windows;
 namespace WxappCpzs
 {
    /// <summary>
    /// Interaction logic for App.xaml
    /// </summary>
    public partial class App : Application
    {
    }
 }
@@ -1,10 +0,0 @@
 using System.Windows;
 [assembly: ThemeInfo(
    ResourceDictionaryLocation.None,            //where theme specific resource dictionaries are located
                                                //(used if a resource is not found in the page,
                                                // or application resource dictionaries)
    ResourceDictionaryLocation.SourceAssembly   //where the generic resource dictionary is located
                                                //(used if a resource is not found in the page,
                                                // app, or any theme specific resource dictionaries)
 )]
@@ -1,12 +0,0 @@
 <Window x:Class="WxappCpzs.MainWindow"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
        xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
        xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
        xmlns:local="clr-namespace:WxappCpzs"
        mc:Ignorable="d"
        Title="MainWindow" Height="450" Width="800">
    <Grid>
    </Grid>
 </Window>
@@ -1,24 +0,0 @@
 using System.Text;
 using System.Windows;
 using System.Windows.Controls;
 using System.Windows.Data;
 using System.Windows.Documents;
 using System.Windows.Input;
 using System.Windows.Media;
 using System.Windows.Media.Imaging;
 using System.Windows.Navigation;
 using System.Windows.Shapes;
 namespace WxappCpzs
 {
    /// <summary>
    /// Interaction logic for MainWindow.xaml
    /// </summary>
    public partial class MainWindow : Window
    {
        public MainWindow()
        {
            InitializeComponent();
        }
    }
 }
@@ -1,11 +0,0 @@
 <Project Sdk="Microsoft.NET.Sdk">
  <PropertyGroup>
    <OutputType>WinExe</OutputType>
    <TargetFramework>net8.0-windows</TargetFramework>
    <Nullable>enable</Nullable>
    <ImplicitUsings>enable</ImplicitUsings>
    <UseWPF>true</UseWPF>
  </PropertyGroup>
 </Project>